● Risography · since 2011

Printing of leaflets in Yekaterinburg

Print flyers with bright design and high-quality color reproduction to promote goods and services.

Calculate the cost →Fill out a brief →☎ +7 (343) 288-71-82
🏭

15 years of experience

We have been working since 2011. Own production at 39 Sovetskaya St. in Yekaterinburg — without intermediaries.

It's ready in 1-2 days

The typical production time is 1-2 business days. Urgent printing in a few hours is for an additional fee.

📦

7 ready-made offers

The online store has more than 7 ready-made copies with a calculated price. From 1 piece.

Just the facts

We make a trial sample before large print runs. Rating 4.2/5 on Yandex, 2GIS, Flamp.

Flyers are an effective means of advertising and informing

Print flyers with bright design and high-quality color reproduction to promote goods and services.

Advantages

Fast production, a variety of formats and paper.

Areas of application

Advertising, events, informing clients.

The order process

Transfer of the layout, approval and prompt production of the print run.

Printing of sheet products on a risograph

The Seventh Legion printing house offers high-quality printing services for blanks, flyers, and advertisements on the risograph. High-performance equipment allows you to duplicate a large number of copies of a sample in a short time. Printing on a risograph It can be ordered in various formats, using colored shades, on paper of different quality. To make an accurate calculation of the order amount, use an online calculator.

What is the benefit of a risography

Replication on a risograph – one of the cheap ways to obtain blank products and other similar products. The principle of operation of the equipment is similar to photocopying, but the result is much higher in quality and speed of reproduction. The technology is based on a matrix made using a laser beam. This ensures the accuracy and clarity of transferring any images to paper media.

    Advantages replications on the risograph:cheapness;
  • high print speed (up to 150 copies per minute);
  • clear image;
  • lack of marriage;
  • production of products in various formats (from A7 to A3).

You can order from us printing of leaflets on a risograph using any 3 colors from the suggested ones: red, blue, black, green. We will prepare any number of copies of one-sided or two-sided forms. We use special equipment for cutting and creasing, as a result of which the products acquire an ideal geometry.

Materials used

When producing sheet products using a risograph, certain requirements are imposed on layouts, which must be taken into account during layout and design development. Paper with a density from 49 to 160 g/m2 of the following types is chosen as the basis for letterheads, leaflets, and advertisements:

  • for digital printing;
  • offset matte for VHI;
  • the newspaper;
  • writing;
  • colored matte.

Mixing shades and contrasting transition from one color to another is unacceptable for this type of printing, therefore, the production of sheet products on a digital duplicator is radically different from printing on a conventional printer or copier. In risography, the method of stenciling ink on paper is used, therefore, special attention is paid to the production of the matrix.

To order the printing of blank products on an A3 risograph, A4 and you can have less than 100 pieces. The cost of the batch depends on the volume, the complexity of the manufacture, the material used and starts from 3 kopecks/piece.

REQUIREMENTS FOR THE ORIGINAL RISOGRAPHY LAYOUTS PROVIDED

  • — The distance from the edge of the sheet to any image or text should be at least 10 mm on each side of the sheet.
  • — The distance from important images (text, drawing, logo) to the place of the subsequent incision should be at least 5 mm (if we are cutting).
  • — When printing in multiple colors, each color must be printed in black and be on a separate sheet. The color must be signed on the back of the sheet.
  • — It is unacceptable to "mix" colors, i.e. superimposing one on another, as well as using precise alignment (two-color checkerboard, etc.).
  • — It is unacceptable to make, for example, a blue outline around red letters, because it is impossible to achieve a perfectly accurate combination of colors on a risograph.
  • — The cut marks should be in the form of crosses 2-3 mm long along the edges of the label.
  • — It is unacceptable to use frames, stripes, etc. as cut marks.
  • — Gradient fills and bitmaps must be printed with a resolution of no more than 300 dpi.
  • — It is not recommended to use lines less than 0.1 mm, as well as solid fillings and inversions of a large area.
  • — When printing a multi-page document, each sheet or page should be numbered on the back with a pencil (if there is no numbering in the layout, which is preferable).

Cost

10 pcs, 210*297
30 ₽
Reverse printing on one side only
10 pcs, 210*297
31 ₽
Newsprint
10 pcs, 210*297
31 ₽
Writing paper
10 pcs, 210*297
32 ₽
VHI Paper

Accurate calculation for your task — in the calculator. We have been working since 2011, with 15 years of experience in the printing industry in Yekaterinburg.

Frequent questions

What is risography and how is it suitable for printing leaflets?
Risography is a modern digital screen printing technology, ideally suited for the rapid production of large print runs of leaflets. It combines high speed, cost-effectiveness and decent quality, which makes it the optimal choice for advertising and informational materials.
How do I calculate the cost of printing leaflets on a risograph?
For a quick and accurate cost calculation, use our online calculator. Specify the print run, format, number of colors, and urgency of the order to instantly get the current price.
What is the minimum print run for flyers?

We accept orders for printing leaflets by the risography method from 100 pieces. This is a cost-effective solution even for small print runs.

What are the advantages of risography for printing flyers?
Main advantages: high printing speed, cost-effectiveness in medium and large print runs, rich colors, the ability to print on paper of different densities and textures.
On what paper can I print leaflets with a risograph?

uncoated paper 80g

What is the maximum number of colors that can be used in a design?

The risograph allows you to use up to 3 colors in one layout. Each color is applied separately, which ensures purity and saturation of the color rendering.

Is it possible to print full-color photos on flyers?
Risography is best suited for printing vector graphics, text, and simple bitmap images. For full-color photos, we recommend digital or offset printing.
What files are needed to prepare the leaflet layout?
We accept layouts in PDF, AI, and CDR formats with at least 300 dpi rasterization. All fonts should be converted to curves, and the colors should be designed according to the risograph palette.

Seventh Legion Printing House in Yekaterinburg

We work with In 2011 — 15 years of experience in printing. Own production on Sovetskaya St., 39 without intermediaries. All printing technologies under one roof: digital, offset, large format, silkscreen, risography, UV, plotter cutting, sublimation, DTF.

We don't write in our materials what we can't do. The site contains only reliable information about deadlines, prices, and technological limitations. Before large print runs, we always make a trial sample so that you can see the result before launching the main order.

Address
39 Sovetskaya St., Yekaterinburg, 620041
Chart
Mon-Fri 09:00-20:00
Sat-Sun 10:00-17:00

Are you ready to calculate?

The Seventh Legion printing house has 15 years of impeccable reputation in Yekaterinburg. The average rating is 4.2/5 based on 176 reviews on Yandex, 2GIS and Flamp.

Go to Calculator →Fill out a brief →